DuraPatcher - Truck Mounted

Durapatcher Truck Mounted

Patching: Step 1

Patching: Step 2

Patching: Step 3

Patching: Step 4

• 135 lbs./min, 1⁄4-1/2-inch wet or dry aggregate

• 450 cfm with 7 psi @ 1500 rpm
• Direct driven from engine flywheel
• 10 psi relief valve

• 80 HP water cooled John Deere

• 15 cfm direct driven
• Governed from 70-95 psi

Emulsion - 250 gallons, 200 psi working pressure R-15 insulation
- Two 1500 watt heat blankets with thermostats
Clean-Out - 15 gallon, 200 psi working pressure
Engine Fuel - 18 gallons

Swing Hose Carrier
• Tri-Fold No Fatigue Design

Operator Controls
• Emulsion and rock flow, engine rpm, horn

Truck Requirements
• 33,000 GVW recommended

• Safety orange

All the same features of the trailer mounted DuraPatcher but with truck-mounted convenience.  No need to feed rock from a dump truck/tow vehicle.  This maneuverable truck-mounted unit carries seven cubic yards of aggregate and 250 gallons of emulsion for self-sufficient patching. DuraPatcher is powered by John Deere diesel engine incorporated on subframe that mounts easily to the truck chassis. Call for truck specifications.

Four Easy Steps

Click Here for our full DuraPatcher brochure.

(File is in PDF format, Click Here to download the reader.)